If you鈥檙e new to the aviation industry, especially as an aircraft maintenance technician (AMT), you鈥檙e bound to hear a lot of new acronyms. While you may already know some of them, one you might not is FOD. FOD is a constant struggle for both airports and the AMTs that work at them. So, what is FOD and what can we do about it?
What is FOD?
FOD is one of the biggest reasons for airplane repairs. Additionally, there are actually two things FOD can stand for. The first one is foreign object debris. Foreign object debris can include any object or item that ends up anywhere it shouldn鈥檛 be and therefore it could cause damage to equipment or individuals. FOD of this type can be almost anything. Common foreign object debris can include but is not limited to:
- Tools
- Trash
- Rocks
- Employee ID badges
- Screws, nuts, bolts
- Gloves
- Goggles
- Coins
- Cell Phones
- Birds and other wildlife
- Volcanic ash cloud
- Hail or snow
- Luggage
- Rags or towels
- Broken pavement
- Soda cans
When any of these objects causes damage to the engine or other parts of the aircraft, then it is considered the other type of FOD: foreign object damage. Best case scenario, the damage is only a dent to the exterior of the plane. Worst case scenario, the object ends up in the engine causing it to malfunction mid-flight. Not only can debris cause damage to aircraft, but jet engines also create a blast that throws debris everywhere upon take off. This could create a dangerous situation to personnel on the ground who could potentially be hit by stone, tools, tire fragments, etc.
The term 鈥淔OD鈥 is mainly used in the aviation and aerospace industries. However, it can be used in any industry where quality and safety are a concern.
How to detect FOD
There are many ways to detect foreign object debris. When it comes to checking for larger pieces of FOD, visual inspections are done of the work areas, runways, and anywhere else the plane may be. include using cameras, infrared technology, and radar to scan the area for debris. These systems can also help detect wildlife.
However, visual inspections and these technologies aren鈥檛 always the best choice when detecting smaller objects. To detect smaller debris, are used. They can quickly and easily sweep runways and hangars. Although not all foreign object debris is magnetic, magnet bars can also be used in the detection of debris. The FAA
How to prevent FOD
Although there are so many ways to detect FOD, what if it was preventable in the first place? One way to help prevent FOD is to make a checklist for every time you perform maintenance on an aircraft. A checklist will help put you in the habit of checking for various types of FOD throughout your workday.
Before starting a job, visually check your work area or the hangar itself for any debris or objects that shouldn鈥檛 be there. While you work, keep all tools in a localized area or on a mat. Every so often, take a moment to visually assess your tool area, making sure nothing is missing. After you complete the job, assess your tool area again. It is also a good idea to perform a walk around of the entire area around your workspace.
Unfortunately, FOD isn鈥檛 always preventable. One of the most well-known FOD incidents was the 鈥溾 in 2009. Shortly after take-off out of LaGuardia Airport, US Airways Flight 1549 was struck by a flock of birds. The airplane lost all engine power and was forced to make an emergency landing in the Hudson River. Luckily, all 155 people on board were able to be rescued safely with only a few serious injuries.
Whether preventable or not, FOD has always been and will continue to be something the aviation industry struggles with. If you鈥檇 like to learn more about what it鈥檚 like to be an AMT performing repairs from FOD and regular maintenance on aircraft, contact NCI today!
