For a lot of people, the most important aspect of flying doesn鈥檛 even have anything to do with the plane itself. In fact, as long as they get their preferred aisle or window seat on the plane, most people don鈥檛 give it another thought. But there鈥檚 somewhere else travelers spend the same, or even more time, during their journeys: airports.
The First Commercial Flight
Now days, airports and airplanes go hand in hand. There were of course hundreds of flights before what is considered . The first commercial flight took place in Florida in 1914. The first ticket of the brand-new St. Petersburg- Tampa Airboat Line was auctioned off to Abram C. Pheil, former mayor of St. Petersburg for $400, or the modern-day equivalent of $10,420.
Although this first airline was short lived- only lasting 4 months- they flew between St. Petersburg and Tampa. A trip that used to take two hours by steam ship, 4- 12 hours by rail, and 20 hours by car now only took 20 minutes.
Because these flights were by Airboat, planes that took off and landed in Tampa Bay, there was no need for an airport.
The First Airports
The first airport was founded in College Park, Maryland when the United States Army Signal Corps created it to serve as a training location. Wilbur Wright instructed the first two military officers to fly the very first government planes in August of 1909. This wasn鈥檛 the only 鈥渇irst鈥 this airport saw. That same year, Wilbur Wright flew Sarah Van Deman, the wife of an Army officer, making . Two years later in 1911, civilian aircraft were allowed to fly out of the airport as well. The College Park Airport, which is still in use, is the world鈥檚 oldest continuously operated airport.
The , which began as an airfield in 1909, was the first airport to have international flights. The site was in use throughout the first World War by the British military, but commercial flights ceased in 1920.
Although commercial flights began after World War 1, they did not really became popular until the 1950s. This is when jet aircraft were starting to overpower piston-engine aircraft. As aircraft became faster and more efficient, the public decided that flying was the way to go.
The Biggest Differences Between Now and Then
The biggest difference between airports now and the first ones created are the runways. were often any flat, even area that was relatively smooth. At the beginning, this often meant racetracks, golf courses, polo fields, or fairgrounds. Before powered flight, it was also essential that these areas had a predictable wind. The Wright Brothers chose Kitty Hawk, NC for their glider tests because it was on the coast with steady breezes off the Atlantic Ocean. Most other early flights were on prairies or near water, where wind patterns were the most predictable.
However, as aircraft became heavier and heavier, they needed something other than bare earth below their land gear. In the 1920s, tests began on different combinations of materials to make runways. They tested combinations of tar, lime, and cement. However, they settled on the concrete and asphalt mixture that is still used today. In order to withstand the wear and tear of take offs and landings, runways today are anywhere from , depending on what type of aircraft they are servicing.
Along with a change in runways, airport security has changed vastly. The first , Australia in 1920 with a terminal design very similar to what we still use. At first, there were no sorts of security measures in place and no one was checking identification unless they were traveling internationally. were introduced in the 1970s. But following the attacks on September 11, 2001, airport security became what it is today.
Some Things Haven鈥檛 Changed
Although aircraft and airports have been constantly changing over the past 100 years, somethings have stayed the same. We have always needed pilots to fly the planes, passengers to ride in them, and crews to maintain them. In order to keep both the airport and the aircraft operational, there is much more going on behind the scenes than your average traveler will ever see. They鈥檒l see the pilots and cabin crew that travel with them from city to city, but there are also hundreds of employees at each airport that ensure their safety.
One of these positions is aircraft maintenance technicians. These crews keep the aircraft in working order, ensuring the safety of both passengers and crew. The average day of an aircraft maintenance technician (insert link once posted) can be both busy and rewarding. Want to learn more? Contact NCI today!
